[dms-discuss] Fwd: Re: Makerspace Referrals

Nicholas Weigand dawtsf at gmail.com
Tue Feb 12 14:52:32 UTC 2019


Re: the speaker. Iirc the amp it is hooked up to is a little flaky. You
might try swapping the left and right speaker cables and see if the left
one starts working (and the right one stops...).

Nicholas

On Mon, Feb 11, 2019, 6:55 PM Robert Nickerson <rob at omsoft.com wrote:

> FYI on the chitter chatter folks
>
> FYI Left speaker is blown or off.
>
> RAN
>
>
> -------- Forwarded Message --------
> Subject: Re: Makerspace Referrals
> Date: Sun, 10 Feb 2019 12:17:22 -0800
> From: Tim Keller <tkeller at inventopia.org> <tkeller at inventopia.org>
> To: Robert Nickerson <rob at omsoft.com> <rob at omsoft.com>
>
> Zero offense taken.
>
> Getting our shop-re-settled has taken longer than I thought - mostly due
> to my inability to focus on it as I’m trying to grow my consulting
> practice.  But we are at the point where I think we should get things
> moving on this.
>
> On the topic of a larger makerspace, I’m conspiring to buy the davis ace
> housewares building...  we should talk about that...
>
> On Sat, Feb 9, 2019 at 4:57 PM Robert Nickerson <rob at omsoft.com> wrote:
>
>> Hi tim,
>>
>> We had a repair cafe event today, and two people asked about setting up
>> a larger makerspace for Davis. So I told them about you, inventopia, and
>> gave them your contact information. Hope its fruitful, and you are not
>> offended, if so I wont do it anymore.
>>
>> We are still down to  go over and work at old action signs I think, if
>> you are. Let me know if you need another copy of the MOU or if there is
>> anything else that needs to be done.
>>
>> Take Care
>>
>> RAN
>>
>>
>> --
>> Robert Nickerson
>> UCD Class of 1996
>> CEO, Om Networks
>>
>> cell: 5308483865
>> www.omsoft.com
>>
>> --
>
> Tim Keller
>
> Executive Director
>
> *Inventopia*
>
> *www.inventopia.org  <http://www.inventopia.org>*
>
> (707) 235-3730 (c)
>
> _______________________________________________
> Davis Makerspace Discuss mailing list
> Discuss at lists.davismakerspace.org
> https://lists.davismakerspace.org/listinfo/discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.davismakerspace.org/pipermail/discuss/attachments/20190212/b7b4dd47/attachment.html>


More information about the Discuss mailing list