[dms-discuss] I am moving

Robert Nickerson rob at omsoft.com
Sun Mar 28 06:09:44 UTC 2021


Hi

I can store some 3D printers if needed at Omsoft to give to DMS when the 
library spot opens.

Take Care

RAN

On 3/21/2021 10:59 PM, Roland wrote:
> Hi Logan,
>
> This got sent to my Spam folder as "suspected phishing" by Gmail, I'm 
> guessing others had the same issue judging by the radio silence.
>
> Can't believe you got all those printers running, that's fantastic! 
> Those things were always so finicky, you'll need to spill the secret 
> to taming them (please don't say knowledge and hard work?).
> They will be a cornerstone of the new space at the library, looking 
> forward to seeing them in action.
>
> I don't have much storage space, maybe enough for 2 printers long-term.
> Hopefully this reply gets some eyeballs on it so we can get some 
> takers, I'll wait a few days and message again separately if I don't 
> hear anything.
> If we can't find enough storage in time for the move, I can take 
> everything temporarily and distribute from my house.
>
> Also just want to say thank you for the expertise and time you've 
> given to the space over the past couple of years (did 2020 even 
> happen?). Congratulations on the next chapter, San Diego is a 
> great city, enjoy it!
>
> -Roland
>
> On Thu, Mar 18, 2021 at 1:15 PM l vinson <lycin8008 at yahoo.com 
> <mailto:lycin8008 at yahoo.com>> wrote:
>
>     All,
>
>     Just making sure the message sent.
>     I don't want to assume anything with the equipment.
>
>
>     Logan Vinson
>
>         On Wed, Mar 10, 2021 at 8:24 PM, l vinson
>         <lycin8008 at yahoo.com <mailto:lycin8008 at yahoo.com>> wrote:
>         Hello Makers!
>
>         I just wanted to tell you that I am moving at the end of May.
>         My wife is graduating from UC Davis Vet school and got her
>         internship in San Diego.
>         I am very much open to discussion as to what to do with the
>         printers.
>
>         A little info on each:
>
>         - Bill's Excellent Printer
>             It works and prints, firmware is all good
>
>         - Prusa i3
>             I fixed the crazy wiring and the frame, converted it from
>         2.85mm filament to 1.75mm, and fixed the firmware. It now
>         prints pretty well.
>
>         - PrinterBot Simple
>             It works and prints, but I already told you that a while
>         ago. (I 3D printed a new chassis for it and got rid of the
>         wood since it was saggy)
>
>         - PrinterBot and PrinterBot plus
>             I did not touch those. They actually need a ton of work to
>         get rid of all the flaws, so much, that it would be better to
>         harvest the motors and maybe the power supply. Then just make
>         whole new printers.
>
>         - Stratasys uPrint Plus
>             Still works great! I managed to get a bunch of supplies
>         from my college, since they had a couple of them. I got more
>         model and support material. There is just one hiccup, the
>         eeprom chips that are included on the material (machine needs
>         to be able to read and store the SN), are for a slightly
>         different model (uPrint SE). So even though it is the same
>         exact ABS material, you cannot use it. So, I think a good
>         project for the hackers would be to hack the eeproms and
>         re-flash a working SN.
>
>         - M3D Micro
>             Still lil' ol' reliable.
>
>
>         Also still have the 2 Computers and Monitors
>
>         Let me know what you guys think! Do you each want to take one
>         or something?
>
>
>         Logan Vinson
>
>     _______________________________________________
>     Davis Makerspace Discuss mailing list
>     Discuss at lists.davismakerspace.org
>     <mailto:Discuss at lists.davismakerspace.org>
>     https://lists.davismakerspace.org/listinfo/discuss
>     <https://lists.davismakerspace.org/listinfo/discuss>
>
>
> _______________________________________________
> Davis Makerspace Discuss mailing list
> Discuss at lists.davismakerspace.org
> https://lists.davismakerspace.org/listinfo/discuss

-- 
Robert Nickerson
UCD Class of 1996
CEO, Om Networks

cell: 5308483865
www.omsoft.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.davismakerspace.org/pipermail/discuss/attachments/20210327/bdba289f/attachment.htm>


More information about the Discuss mailing list