[dms-discuss] RFID on Makerspace door is not working

[Braden Pellett]

The door is back on now.

The power strip to which the door computer is connected had gotten subtly
unplugged from the wall outlet.  It is now receiving power again.

  - Braden


On Mon, Feb 18, 2019 at 08:32:03PM -0800, Braden Pellett wrote:
> I can try taking a look in person on Wednesday some time, though
> unfortunately not before then.
> 
>   - Braden
> 
> 
> On Mon, Feb 18, 2019 at 06:56:25PM -0800, Robert Nickerson wrote:
> > Hi 
> > 
> > Different Tim then the inventopia guy
> > 
> > On Feb 18, 2019 4:14 PM, Ryan McKay <yakcm.nayr at gmail.com> wrote:
> > 
> >     I went by about an hour ago.
> > 
> >     Restarting everything didn't change anything, all the wiring appears
> >     intact, the solenoid is pushing as strong as ever when activated with the
> >     black button on the box, it just doesn't seem to care that the reader has
> >     read a fob and beeped.  Not sure where to go from here.
> > 
> >     Rob, I'll be nearby this evening if you need me to let you in with my key
> >     for your open hours tonight.
> > 
> >     -Ryan
> > 
> > 
> >     On Mon, Feb 18, 2019 at 10:34 AM <bibliophiletwo at gmail.com> wrote:
> > 
> >         Dear Davis Makers,
> > 
> >           I was at the space for Sunday night. I was able to enter with the
> >         blue RFID fob, but the deadbolt stopped working when I tried to leave. 
> >         I tried to get the reader to respond several times from both inside and
> >         outside. It would beep, but the deadbolt would not slide.  The black
> >         button works and I was able to lockup the space.
> >           I texted Ryan and promised him I would send out an email about this,
> >         but I forgot until just now. Ryan said he would try to swing by and
> >         take a look at it today.
> > 
> >         Bill
> _______________________________________________
> Davis Makerspace Discuss mailing list
> Discuss at lists.davismakerspace.org
> https://lists.davismakerspace.org/listinfo/discuss