[dms-discuss] RFID on Makerspace door is not working

[Ryan McKay]

yes, please do


On Mon, Feb 18, 2019 at 6:55 PM Robert Nickerson <rob at omsoft.com> wrote:

> Hi
>
> Different Tim then the inventopia guy
>
> On Feb 18, 2019 4:14 PM, Ryan McKay <yakcm.nayr at gmail.com> wrote:
>
> I went by about an hour ago.
>
> Restarting everything didn't change anything, all the wiring appears
> intact, the solenoid is pushing as strong as ever when activated with the
> black button on the box, it just doesn't seem to care that the reader has
> read a fob and beeped.  Not sure where to go from here.
>
> Rob, I'll be nearby this evening if you need me to let you in with my key
> for your open hours tonight.
>
> -Ryan
>
>
> On Mon, Feb 18, 2019 at 10:34 AM <bibliophiletwo at gmail.com> wrote:
>
> Dear Davis Makers,
>
>   I was at the space for Sunday night. I was able to enter with the blue
> RFID fob, but the deadbolt stopped working when I tried to leave.  I tried
> to get the reader to respond several times from both inside and outside. It
> would beep, but the deadbolt would not slide.  The black button works and I
> was able to lockup the space.
>   I texted Ryan and promised him I would send out an email about this, but
> I forgot until just now. Ryan said he would try to swing by and take a look
> at it today.
>
> Bill
>
> Sent from my iPhone
> _______________________________________________
> Davis Makerspace Discuss mailing list
> Discuss at lists.davismakerspace.org
> https://lists.davismakerspace.org/listinfo/discuss
>
>
> _______________________________________________
> Davis Makerspace Discuss mailing list
> Discuss at lists.davismakerspace.org
> https://lists.davismakerspace.org/listinfo/discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.davismakerspace.org/pipermail/discuss/attachments/20190218/f6c06035/attachment-0001.html>