[dms-discuss] Clogged 3D Printer Tip

[Nicholas Weigand]

Is it possible that the extruder is not clogged? I've run into issues where
the filament wouldn't feed properly because the tension on the filament
rollers(?) wasn't right. I also believed that the extruder was clogged at
the time but couldn't find any clog.
On Jul 30, 2015 1:02 PM, "Roland Synnestvedt" <rsynnest at gmail.com> wrote:

> Hi All,
>
> Printrbot LC (the 3D printer on the southwest table) has a clogged
> extruder again.
> A fellow named Noah was attempting to use it and it wouldn't print right
> off the bat.
> I told Noah he could take a crack at fixing it, and he took the nozzle
> off,
> but it appears to be clogged a bit further up the line than the nozzle
> itself.
> If anyone is familiar with 3D printers and wants to take a look, go ahead.
> Otherwise, Noah said he would be back next week to have another go at it.
>
> -Roland
>
> _______________________________________________
> Davis Makerspace Discuss mailing list
> Discuss at lists.davismakerspace.org
> http://lists.davismakerspace.org/listinfo/discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.davismakerspace.org/pipermail/discuss/attachments/20150730/f8e80f67/attachment.html>