[dcw] 3D printers 'n Things.

[Lucian Novosel]

Hey Braden,
   as a follow up to our conversation from today. I'm still interested in
coming in tomorrow at 10am. Please tell me if you can make it.

-Lucian

Lucian Novosel
CS Undergrad
@LucianNovo <https://twitter.com/#%21/Enviropedia>



On Sun, Sep 1, 2013 at 1:20 PM, Lucian Novosel <lucia... at gmail.com>wrote:

> Hey Braden, that would be perfect! thanks so much I'll be sure to stop by
> around four.
>
>
> On Sunday, September 1, 2013, Braden Pellett wrote:
>
>> Hi Lucian,
>>
>> I was talking with Tim off-list, and he was suggesting the Printrbot LC
>> that is in the space.
>>
>>     http://printrbot.com/support/printrbot-lc/
>>
>> It's print volume is 6"x6"x6".  Would that be big enough for your project?
>>
>> The set up process for the Printrbot LC should be similar to what you saw
>> me do to set up the Printrbot Simple.  The page linked above includes a
>> link to a similar PDF manual.
>>
>> SO, if you wanted to try to connect to and print from the Printrbot LC
>> during my hours today, I'd be fine with that.
>>
>> The proviso there is: it will be kind of up to you to figure out; I'm not
>> going to be able to offer much help, both due to lack of knowledge and due
>> to lack of time as I'm trying to work on a project of my own. :)
>>
>> Also, I probably will not be able to be around the space on Monday.
>>
>> Anyway, feel free to stop by my hours today, of course.
>>
>>   - Braden
>>
>>
>> On Sat, Aug 31, 2013 at 07:25:40PM -0700, Lucian Novosel wrote:
>> > Hey there,
>> >    my name is Lucian and I recently came by the space to learn about
>> your
>> > 3D printers (although I've been here in the past when you guys were
>> located
>> > at the Bike Church :).  I'm really interested in joining your evolving
>> > community and using one of your printers.
>> >
>> > I normally work at the rapid prototyping lab on campus as a volunteer,
>> and
>> > some of our 3D printers are out of commission. I'd be glad to join your
>> > community and do more with 3D printing. If you'd let me use a printer
>> I'd
>> > be happy to contribute some filament to the space.
>> >
>> > Here's one of the models that I wanted to print, it's a bike mount for
>> an
>> > iPhone.
>> >
>> > <
>> https://lh6.googleusercontent.com/-iGfdUoCxxa4/UiKhlwCQdyI/AAAAAAAABI0/04YWPz0am5U/s1600/Screen+Shot+2013-08-31+at+7.07.43+PM.png
>> >
>> >
>> > If possible I'd like to try out a print later on sunday or monday. If
>> > you're interested in learning about gcode or the 3d printing process
>> I'd be
>> > happy to come around the same time as you.
>> >
>> > It would be great if I could reach out to Tim or Mick about using the
>> > printers,
>> >
>> >  if either of you could reply or email me(lucia... at gmail.com), that
>> > would be great.
>> >
>> >
>> > Thanks!
>> >
>> > You can see more of the things I make on grabcad<
>> http://grabcad.com/library/bike-iphone-mount-1>
>> > .
>>
>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "Davis Community Workshop" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/davis-community-workshop/DuFX93xVVEQ/unsubscribe
>> .
>> To unsubscribe from this group and all its topics, send an email to
>> davis-community-wo... at googlegroups.com.
>> To post to this group, send email to
>> davis-commun... at googlegroups.com.
>> Visit this group at
>> http://groups.google.com/group/davis-community-workshop.
>> For more options, visit https://groups.google.com/groups/opt_out.
>>
>
>
> --
> Lucian Novosel
> CS Undergrad
> @LucianNovo <https://twitter.com/#%21/Enviropedia>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.davismakerspace.org/pipermail/discuss/attachments/20130901/525bd892/attachment.html>