<div dir="ltr">Hi,<br><br>My first hours at the Library space went ok.  Nobody came by, but I got a chance to try the 3D printers on my own.  I was able to find an existing model and get it printed all within the 2 hours I spent there (though just barely, heh).  I used both printers simultaneously to make the process go faster.  Overall it went quite smoothly.<br><br>I ended up printing this thing:<br><br>  <a href="https://makerworld.com/en/models/608086">https://makerworld.com/en/models/608086</a><br><div><br></div><div>It came out in these pieces:</div><div><br></div><div><img src="cid:ii_m2bf73450" alt="PXL_20241016_050345644.jpg" width="551" height="413" style="margin-right: 0px;"></div><div><br></div><div>And went together like this:<br></div><div><br><img src="cid:ii_m2bf73521" alt="PXL_20241016_050204412.jpg" width="551" height="397"><br></div><div><br></div><div>Each color was from a different printer.  Maybe my personal bar is low, but I think it is pretty neat that on the first try from two separate printers, all the pieces could fit together properly. 😅</div><div><br></div><div>  - Braden<br></div></div>