<div dir="auto">So Wednesday went really well for us, we had a good turnout: Rob, his son Callen, myself, my brother in-law Mike, and my friend Riley.<div dir="auto"><br></div><div dir="auto">Fixing the lights was easier than we expexted.  We went in to this expecting that some wiring faults would be the problem, since Rob had JUST replaced a bunch of LED bulbs (which are known to be very long-lasting and reliable).</div><div dir="auto"><br></div><div dir="auto">Turns out we just had a batch of bad bulbs (every bad bulb was from a brand called uBRITE, so avoid them in the future) and some incorrect switch positions (the turn-switch on the socket housings) from previous troubleshooting attempts.  Once we put some due-diligence into swapping a known-good bulb into every lamp with suspect wiring and testing every switch position (these lamps have 4 clicks to a "rotation") it quickly became clear that all we needed was some better bulbs.</div><div dir="auto"><br></div><div dir="auto">While we were working on that, Riley and Callen tore down one of the old inkjet printers that Rob brought in.  They were able to salvage a few good motors (both DC and stepper), a peristaltic pump, and a few belts, pulleys, gears and rods.  The salvaged parts got added to the Radio Shack drawers (which look great so far, thanks Roland!) and the bulk of the printer got thrown out.  These are some good parts for any kind of mechatronic projects people might want to make, and a bit of space has been freed up by getting rid of the printer.</div><div dir="auto"><br></div><div dir="auto">We then moved on to installing the AC unit.  We found the hole in the ceiling that Braden mentioned, but it has been tarred over and the corrugated tin roof installed on top of that... so I doubt the landlord would be too thrilled if we went cutting holes in the roofing.  We then discussed the viability of cutting into the southeastern-most window as suggested by Aaron but decided we didn't want to risk running into the plywood/wire mesh/broken glass sandwich that Braden warned us about.</div><div dir="auto"><br></div><div dir="auto">Rob then noticed that we've got a strip of plywood that lines the top of each north-side window (the functional ones) and we all agreed that it was a perfect solution.  Mike (who is very handy with all things wood and power tools) got us an appropriately sized oval hole cut out above the middle Northern window and installed the blanking plate for the vent over it.  He then made us a stable base for the AC unit to sit upon, as the vent tube for the hot air exhaust is not long enough to reach the hole if it sits directly on the table.</div><div dir="auto"><br></div><div dir="auto">As we were hoisting the AC up into the table, we noticed that the top of the table was at an angle.  Turns out that the back right leg of the table was broken at the leg-to-table interface and the front right leg was missing, but the leg-to-table interface was there and intact.  So we swapped the leg from the back to the front, then Mike built us a new table leg for the back.</div><div dir="auto"><br></div><div dir="auto">Once the AC was installed we got it turned on and noticed that we really ought to have it at ground level due to the way it shoots the cold air out the top of it.  In order for this to happen we'll need to extend the vent tube with some dryer vent hose (or something similar).</div><div dir="auto"><br></div><div dir="auto">We then renamed the "out box" as the "free box" and designated a new "out box" so we can get the system Jax described at the beginning of this email chain put in place.  Next board meeting we will throw out everything in the free box as it contains the contents of last month's out box that we went through at last month's board meeting.  Feel free to start adding anything to the new out box that you feel is no longer needed in the space, so we can check it out at the next board meeting!</div><div dir="auto"><br></div><div dir="auto">Also remaining, I think it would probably be good to have the AC wired in to the same circuit breaker as the lights.  We only have two breakers for the space inside the breaker box, one for the lights and one for the outlets (both 20 amps).  The AC takes 11 amps (Riley tested it with his clamp meter) so as it currently stands (plugged in to a power strip on the same circuit as all the computers and stuff) we might start tripping breakers if it's running at the same time as too many other things.  We can discuss the viability of this at the next board meeting.</div><div dir="auto"><br></div><div dir="auto">Overall, we had a very successful day of space maintenance.  Big huge thanks to Rob, Callen, Riley, and Mike!  Attached is a photo of a bunch of sweaty dudes, lol.</div><div dir="auto"><br></div><div dir="auto">-Ryan</div><br><div class="gmail_extra" dir="auto"><br><div class="gmail_quote">On Jun 20, 2017 11:20 PM, "Braden" <<a href="mailto:dms@dabrado.net">dms@dabrado.net</a>> wrote:<br type="attribution"><blockquote class="quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Thank you everyone for all the work!<br>
<br>
Maybe you've investigated this already, but in terms of trying to use one of<br>
the remaining boarded-up windows as an exhaust: the windows on the other<br>
side, back when they were in their boarded-up state, were a sandwich of two<br>
pieces of plywood with a wire-mesh and (broken) window in the middle.  So<br>
there may be a similar situation on the remaining boarded-up windows.<br>
<br>
Also, in case it provokes any ideas, there is a hole in the ceiling that<br>
connects to a (currently) plugged up and disconnected pipe on the roof, that<br>
existed for some unknown purpose.  However that is presumably too far away<br>
to connect the portable A/C unit without some kind of extension, if that is<br>
even possible.<br>
<br>
  - Braden<br>
<div class="elided-text"><br>
<br>
On Wed, Jun 21, 2017 at 02:05:39AM +0000, Roland Synnestvedt wrote:<br>
> Hi all,<br>
><br>
> I missed the meeting this month but wanted to give a brief update on some<br>
> things.<br>
> I was able to install some of the wall shelving (a 4' x 8' section) and<br>
> have been organizing things here and there.<br>
> I also emptied the two big boxes of random components (resistors, power<br>
> bricks, etc) from the 3d print area and put them in the metal drawer units,<br>
> which I setup under the pegboard for now.<br>
> The drawers aren't labelled yet but feel free to fill them up as you see<br>
> fit. I tried to keep them somewhat organized (power cords in one drawer,<br>
> random-ass components from the same company in another drawer) but it is<br>
> easy to reorganize if things get messy. Same goes for the wall shelving,<br>
> though that's pretty close to full.<br>
> I also brought in a working vacuum cleaner so I figured we could get rid of<br>
> the old one unless people want to part it out.<br>
><br>
> Regarding the A/C unit, I discussed it a bit with Aaron (he brought in the<br>
> unit) and the best option seemed to be to cut a hole in the plywood that's<br>
> boarding up the Southeastern-most window. That way the vent is blowing<br>
> under the outdoor stairs (we will probably want to angle it downward so<br>
> it's not blowing hot trash air at people). We will need to shuffle some<br>
> stuff in the surrounding area of the fridge, but we should be able to just<br>
> measure and jigsaw that plywood. I'm thinking maybe we can do that next<br>
> week.<br>
><br>
> I'm out of town this whole week so won't be hosting hours tomorrow, I'll<br>
> update the wiki. Good luck on the lighting project Ryan!<br>
><br>
> -Roland<br>
><br>
> On Thu, Jun 15, 2017 at 4:57 PM, Ryan McKay <<a href="mailto:yakcm.nayr@gmail.com">yakcm.nayr@gmail.com</a>> wrote:<br>
><br>
> > I normally have pretty much zero obligations and not much going on in my<br>
</div>> > life, so *of course* as soon as I step forward to help with a project<br>
<div class="quoted-text">> > around the space my life gets super busy for a couple weeks.  The project<br>
> > that has had me stuck 80 miles away from Davis pretty much every day since<br>
> > our June board meeting (building a 10'x16' post-and-beam shed from<br>
> > full-dimensioned lumber milled in our own back yard from trees felled in<br>
> > said yard at my parents' place) has now reached a stopping point while we<br>
> > wait for some more materials to arrive, and after the Father's Day weekend<br>
> > concludes I will be back in the flatlands for a few days.<br>
> ><br>
> > So... Rob, I will be in touch soon to coordinate a day that works for both<br>
> > our schedules to get this lighting situation checked out.  Once we know the<br>
> > exact day/time I will share the deets here, in case anyone else wants to<br>
> > help out.  More hands are always useful for projects like this, and my goal<br>
> > is to get this taken care of before the repair cafe happens.<br>
> ><br>
> > -Ryan<br>
> ><br>
> ><br>
> > On Fri, Jun 9, 2017 at 2:14 PM, yourcurtainsareugly <<br>
> > <a href="mailto:yourcurtainsareugly@gmail.com">yourcurtainsareugly@gmail.com</a>> wrote:<br>
> ><br>
> >> Hi, all!<br>
> >><br>
> >> As discussed at the last board meeting, we have some new projects for<br>
> >> improving the 'Space.<br>
> >><br>
> >><br>
</div>> >>    1. Fixing lighting<br>
> >>    2. Building a ramp for better accessibility<br>
> >>    3. Installing a vent for the A/C unit<br>
<div class="elided-text">> >><br>
> >> Rob and Ryan have taken charge of the lighting, so if you two would like<br>
> >> any assistance, please reach out!<br>
> >><br>
> >> For the others, give a shout out here if you'd like to take them on, and<br>
> >> let us know when you'd like to work on them. Anything that's left over can<br>
> >> be done during the repair cafe on the 25th, but we should get the A/C going<br>
> >> before the first big heat wave!<br>
> >><br>
> >><br>
> >> In other news, we decided at the last meeting to officially effect an<br>
> >> outbox system. Simply, if you think something is useless, unused, or just<br>
> >> unnecessarily taking up space, put it in a box marked "out". If you find<br>
> >> something in an outbox that you still need, take it out and mark it or<br>
> >> otherwise make it obvious that it's part of a project of yours. At each<br>
> >> board meeting, we'll demote anything that's still in an outbox to a "free"<br>
> >> box. Anything in the free box is fair game to take home or where it may be<br>
> >> used. Again, at the board meetings, anything that has remained in the free<br>
> >> box for a month has proven its complete and utter uselessness to all, and<br>
> >> will be disposed of with extreme prejudice.<br>
> >><br>
> >> Sound simple enough? Please let me know if I've been unclear or you have<br>
> >> any questions.<br>
> >><br>
> >> -Jax<br>
> >><br>
> >> ______________________________<wbr>_________________<br>
> >> Davis Makerspace Discuss mailing list<br>
> >> <a href="mailto:Discuss@lists.davismakerspace.org">Discuss@lists.davismakerspace.<wbr>org</a><br>
> >> <a href="http://lists.davismakerspace.org/listinfo/discuss" rel="noreferrer" target="_blank">http://lists.davismakerspace.<wbr>org/listinfo/discuss</a><br>
> >><br>
> >><br>
> ><br>
> > ______________________________<wbr>_________________<br>
> > Davis Makerspace Discuss mailing list<br>
> > <a href="mailto:Discuss@lists.davismakerspace.org">Discuss@lists.davismakerspace.<wbr>org</a><br>
> > <a href="http://lists.davismakerspace.org/listinfo/discuss" rel="noreferrer" target="_blank">http://lists.davismakerspace.<wbr>org/listinfo/discuss</a><br>
> ><br>
> ><br>
<br>
> ______________________________<wbr>_________________<br>
> Davis Makerspace Discuss mailing list<br>
> <a href="mailto:Discuss@lists.davismakerspace.org">Discuss@lists.davismakerspace.<wbr>org</a><br>
> <a href="http://lists.davismakerspace.org/listinfo/discuss" rel="noreferrer" target="_blank">http://lists.davismakerspace.<wbr>org/listinfo/discuss</a><br>
<br>
______________________________<wbr>_________________<br>
Davis Makerspace Discuss mailing list<br>
<a href="mailto:Discuss@lists.davismakerspace.org">Discuss@lists.davismakerspace.<wbr>org</a><br>
<a href="http://lists.davismakerspace.org/listinfo/discuss" rel="noreferrer" target="_blank">http://lists.davismakerspace.<wbr>org/listinfo/discuss</a><br>
</div></blockquote></div><br></div></div>