[dcw] 3D printers 'n Things.

[Lucian Novosel]

Hey Braden, that would be perfect! thanks so much I'll be sure to stop by
around four.

On Sunday, September 1, 2013, Braden Pellett wrote:

> Hi Lucian,
>
> I was talking with Tim off-list, and he was suggesting the Printrbot LC
> that is in the space.
>
>     http://printrbot.com/support/printrbot-lc/
>
> It's print volume is 6"x6"x6".  Would that be big enough for your project?
>
> The set up process for the Printrbot LC should be similar to what you saw
> me do to set up the Printrbot Simple.  The page linked above includes a
> link to a similar PDF manual.
>
> SO, if you wanted to try to connect to and print from the Printrbot LC
> during my hours today, I'd be fine with that.
>
> The proviso there is: it will be kind of up to you to figure out; I'm not
> going to be able to offer much help, both due to lack of knowledge and due
> to lack of time as I'm trying to work on a project of my own. :)
>
> Also, I probably will not be able to be around the space on Monday.
>
> Anyway, feel free to stop by my hours today, of course.
>
>   - Braden
>
>
> On Sat, Aug 31, 2013 at 07:25:40PM -0700, Lucian Novosel wrote:
> > Hey there,
> >    my name is Lucian and I recently came by the space to learn about your
> > 3D printers (although I've been here in the past when you guys were
> located
> > at the Bike Church :).  I'm really interested in joining your evolving
> > community and using one of your printers.
> >
> > I normally work at the rapid prototyping lab on campus as a volunteer,
> and
> > some of our 3D printers are out of commission. I'd be glad to join your
> > community and do more with 3D printing. If you'd let me use a printer I'd
> > be happy to contribute some filament to the space.
> >
> > Here's one of the models that I wanted to print, it's a bike mount for an
> > iPhone.
> >
> > <
> https://lh6.googleusercontent.com/-iGfdUoCxxa4/UiKhlwCQdyI/AAAAAAAABI0/04YWPz0am5U/s1600/Screen+Shot+2013-08-31+at+7.07.43+PM.png
> >
> >
> > If possible I'd like to try out a print later on sunday or monday. If
> > you're interested in learning about gcode or the 3d printing process I'd
> be
> > happy to come around the same time as you.
> >
> > It would be great if I could reach out to Tim or Mick about using the
> > printers,
> >
> >  if either of you could reply or email me(lucia... at gmail.com<javascript:;>),
> that
> > would be great.
> >
> >
> > Thanks!
> >
> > You can see more of the things I make on grabcad<
> http://grabcad.com/library/bike-iphone-mount-1>
> > .
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "Davis Community Workshop" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/davis-community-workshop/DuFX93xVVEQ/unsubscribe
> .
> To unsubscribe from this group and all its topics, send an email to
> davis-community-wo... at googlegroups.com <javascript:;>.
> To post to this group, send email to
> davis-commun... at googlegroups.com <javascript:;>.
> Visit this group at
> http://groups.google.com/group/davis-community-workshop.
> For more options, visit https://groups.google.com/groups/opt_out.
>


-- 
Lucian Novosel
CS Undergrad
@LucianNovo <https://twitter.com/#%21/Enviropedia>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.davismakerspace.org/pipermail/discuss/attachments/20130901/a44e8259/attachment.html>